3-34
(25) PRINT QUALITY MODE
Select whether to automatically correct the
print quality or not.
<Parameter (numeral input)>
OFF
Automatic correction is not performed.
ON
Automatic correction is performed.
Note
If a part (characters or halftone) of an image is disturbed due to excessive
automatic correction, set this mode to OFF and be sure to adjust the media
advance correction value.
(26) PH CLEANING
This function is to keep the print heads
clear of
debris and dried ink to maintain print quality.
<Parameter <numeral input)>
START & END
This mode executes cleaning automatically at the start or end
of a print, depending on print history.
DURING PRNT
This mode executes cleaning automatically at a certain inter-
val during printing.
DURING PRNT2
This mode executes cleaning automatically at a certain inter-
val during printing.
Note
-
After cleaning is executed during printing using [DURING PRNT] mode, a
splicing line may appear on the print-out.
To eliminate the splice line, see
P.3-35 [(27) BACK ADJUST VAL].
Sometimes, due to the media or printed image, a splice line will still appear
in the print. In this case, use the [START & END] or [DURING PRNT2] modes.
- With [DURING PRNT2] mode, cleaning is executed during printing. Splices
are matched better than [DURING PRNT]. But, colors at before and after the
splice may change. Select the mode suitable for media characteristics and
print image.
#PH CLEANING
>XX:START & END
XX : Selected media number
Correct with the
back adjust value.
Cleaning
#IMAGE IMPROVE.
>XX:OFF
XX : Selected media number
IP-5610取説_E.indb 34
09.4.3 3:14:44 PM
