3-26
4. DENSITY
[high density print]
(8 passes)
This mode is effective when printing transparent media (such as FF, transparent vinyl chloride). The print of
100 % is printed in 200 % at maximum. The printing speed is the same as that of [QUALITY].
5. DRAFT
[productivity weight]
(2 passes)
Printing is in the resolution of 720 × 360dpi. The printing speed is two times the [NORMAL1]. The print den-
sity is light comparing with [NORMAL1]. Depending on the print image, banding of print may be visible. The
entire print of 100 % is printed in 50 % of [NORMAL1]. It can be used for checking a layout.
6. FINE DRAFT
[produc picture quality weight]
(4 passes)
Printing is in the resolution of 720 ×
540 dpi. The printing speed is the same as that of [NORMAL1]. The im-
age quality of photo is almost identical comparing with [NORMAL1]. As the entire print of 100 % becomes 75
% of that in [NORMAL1], if color density is a problem, use [NORMAL1] mode.
Note
-
The recommended print mode is [NORMAL1]. Use other modes for increased
productivity or picture quality depending on customer requirements.
(6)
PRINT DIRECTION
Select the print direction of a media.
<Parameter (selection input)>
BIDIR
Printing occurs in two directions.
UNIDIR
Printing occurs in only one direction.
#PRINT DIRECTION
>XX:BIDIR
XX : Selected media number
Bi-direction print
: Movement of Print head
: Print image
Uni-direction print
: Movement of Print head
: Print image
IP-5610取説_E.indb 26
09.4.3 3:14:41 PM
