3-35
O
pe
ra
tio
n p
an
el o
f m
en
u o
pe
ra
tio
n
q
Explanation of each menu operation
3
- When [DURING PRNT] is selected, if [TUR MODE](
P.3-28) of take-up is
set to [TENSION](
P.3-28) , the same operation as [START & END] mode is
performed.
(27) BACK ADJUST VAL
Set the back adjust value of the media.
The splice line of two images divided
by performing the auto cleaning (PH
CLEANING [DURING PRNT] during
printing is corrected.
<Parameter (numeral input)>
+/– 2000
pulses (Unit : about 3.5 μm)
(28) ADVANCE PREF
Select the ADVANCE PREFERENCE of MEDIA
ADVANCE VALUE.
<Parameter (numeral input)>
SOFTWARE
Data (value) sent from RIP of computer is the controlling
source.
FRONT PANEL
The value set in the MEDIA REG MENU (or M.ADV MENU) of
printer is the controlling source.
(29) PRINT MODE PREF
Select the print mode preference.
<Parameter (numeral input)>
SOFTWARE
Data (print mode) sent from RIP of computer is the controlling
source
FRONT PANEL
The print mode set in the MEDIA REG MENU of printer is the
controlling source.
#BACK ADJUST VAL
>XX:+0000PULSE
XX : Selected media number
Half way on the path
Cleaning
#PRINT MODE PREF
>XX:SOFTWARE
XX : Selected media number
#ADVANCE PREF
>XX:SOFTWARE
XX : Selected media number
IP-5610取説_E.indb 35
09.4.3 3:14:44 PM
