Siemens SICAM MMU 7KG9663 Device Manual Download Page 89

Page: 89 / 262

7 Operation

7.3 Configuration of the Device

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

✧

Select the desired file (extension .cfg) in the directory.

✧

Click

Open

The selected path is inserted into the

Browse

field in the input/output window, figure 7-12.

✧

Click

Open

The device configuration from the CFG file is loaded.

7.3.1.3

Finish Configuration

When you have changed the configuration, you must either enable it as the active set of parameters or save it.

Activating the Set of Parameters

activate

the set of parameters, proceed as follows:

✧

In the navigation window, click the

Finish configuration

menu and then the

Activation

menu item.

Fig. 7-14

Configure Tab, Activation Input/output Window

NOTE

You can open only files with the following properties of the file name:

•

Maximum 8 characters and extension (.cfg)

•

Only containing:

−

Letters: a to z, A to Z

−

Numbers: 0 to 9

−

Hyphen (-) and underline (_)

SICAM-MMU_7KG9663_US.book Page 89 Monday, December 7, 2015 12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews:

Siemens SICAM MMU 7KG9663, Device Manual, Page: 89 / 262

Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews: