Siemens SICAM MMU 7KG9663 Device Manual Download Page 121

Page: 121 / 262

7 Operation

7.3 Configuration of the Device

121

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

If you have connected a SICAM I/O Unit as subdevice at the SICAM MMU and want to edit the communication
with the subdevice, proceed as follows:

✧

In the navigation window, click the

Administrative

menu and then

I/O Unit subdevice.

✧

In the entry

I/O Unit connected

, select the

yes

option.

Bild 7-40

Configure Tab, I/O Unit subdevice

✧

Enter the desired values in the fields and select the indications from the list boxes according to Table 7-12.

✧

After the parameterization click

Send

The parameters are transmitted to the device but not enabled yet (passive set of parameters).

✧

If you do not want to make any additional settings, continue with the

Activation

of the device configuration

according to section

Activating the Set of Parameters

. If you want to change other settings, enter the

changes and then enable the device configuration as described in section

Activating the Set of

Parameters

NOTE

If you have selected the

option in the entry

I/O Unit connected

, no entries or changes are possible.

SICAM-MMU_7KG9663_US.book Page 121 Monday, December 7, 2015 12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews:

Siemens SICAM MMU 7KG9663, Device Manual, Page: 121 / 262

Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews: