7 Operation
7.3 Configuration of the Device
117
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Default Settings and Setting Ranges of the Measured Value Data Groups
1)
Only relevant, if threshold method not equal -
none-
2)
Data points that are selected as
blocked
will not be transmitted as spontaneous event any more, if
changes occur. They are marked as
quality code
=
blocked
in the
cyclic telegrams
and
general inter-
rogation
.
Table 7-11 Settings of the Measured Value Data Groups
Parameter
Default Setting
Setting Range
Measured value data
group
AC voltage
Acc. to list box
Threshold Processing
(per Measured Value Data Group)
Threshold method
(Explanation see
chapter 15.3.2.3)
Fixed
-none-
Fixed
Integrated
Fixed and integrated
Threshold calculation
1)
(Explanation see
chapter 15.3.2.3)
Absolute (in unit of the measured
value)
Absolute (in unit of the measured
value)
Relative (in percentage related to the
last transmitted measured value)
Threshold value
1)
AC voltage:
5 V
AC current:
0.05 A
Active power:
2 W
Reactive power:
2 var
Apparent power:
2 VA
Angle:
3°
Active power factor cos
φ
:
0.05
Frequency:
0.2 Hz
Harmonics V magnitude:
0.1 V
Harmonics I magnitude:
0.05 A
Harmonics V angle:
3°
Harmonics I angle:
3°
Percentage value:
0.5 %
Absolute threshold calculation:
Depending on the selected
Measured
value data group
Relative threshold calculation:
0 % to 100 %
Data Points
(per Measured Value Data Group)
Information name
The information names cannot be
edited in this column. The displayed
information names depend on the
setting of the measured value data
group.
Address (IOA)
See chapter 9.3.5
The addresses (IOA) cannot be edited
in this column. The displayed
addresses (IOA) depend on the
setting of the measured value data
group.
Transmission
enable
blocked
2)
enable
SICAM-MMU_7KG9663_US.book Page 117 Monday, December 7, 2015 12:22 PM