Siemens SICAM MMU 7KG9663 Device Manual Download Page 85

Page: 85 / 262

7 Operation

7.2 Start and Design of the User Interface

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

Error Log

To display the error messages, proceed as follows:

✧

In the navigation window, click the

Message Logs

menu and then

Error log

The error messages are listed in the input/output window as follows:

Fig. 7-9

Information Tab, Error Log

−

Serial

No.

−

Date

of registration

−

Time

of registration

−

Relative time

(referring to the start of operation, output in milliseconds)

−

Task

Code

and

Location

are service information for the manufacturer.

−

Description

of the error

NOTE

The information about error messages described below is intended for service purposes. Inform the customer
service about this information when there are problems with your device.

NOTE

The error messages can be printed as described in chapter 7.2.5.2, section

File Download

→

Open

The chapter 7.5.4.2 explains how to delete the error messages manually.

SICAM-MMU_7KG9663_US.book Page 85 Monday, December 7, 2015 12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews:

Siemens SICAM MMU 7KG9663, Device Manual, Page: 85 / 262

Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews: