Siemens SICAM MMU 7KG9663, Device Manual, Page: 119 / 262

7 Operation
7.3 Configuration of the Device
119 SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Redundancy IEC 60870-5-104 (Parameter of Connection 2)
To add a redundant connection or to edit its settings, proceed as follows:
✧
In the navigation window, click the Administrative menu and then Communication Ethernet .
Fig. 7-39 Configure Tab, Communication Ethernet via IEC 60870-5-104, Redundancy IEC 60870-5-104
✧
Select the desired Redundancy mode in the lower section of the input/output window under
Redundancy IEC 60870-5-104 .
✧
After the parameterization click Send .
The parameters are transmitted to the device but not enabled yet (passive set of parameters).
✧
If you do not want to make any additional settings, continue with the Activation of the device configuration
according to section Activating the Set of Parameters . If you want to change other settings, enter the
changes and then enable the device configuration as described in section Activating the Set of
Parameters .
SICAM-MMU_7KG9663_US.book Page 119 Monday, December 7, 2015 12:22 PM