manualshive.com logo in svg

Siemens SICAM MMU 7KG9663, Device Manual, Page: 198 / 262

Share
Download
Siemens SICAM MMU 7KG9663 Device Manual Download Page 198

9 Communication

9.3 IEC 60870-5-104

198

SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

•

Connection state:

Disabled (only for connection 2): no redundancy parameterized.

Offline: This connection is not connected with an IEC 60870-5-104 

master.

Online: connected with an IEC 60870-5-104 master for the redun-

dancy method 

Equal connections

Online / started: active connection to an IEC 60870-5-104 master for 

the redundancy method 

IEC 60870-5-104

Online / stopped: passive (backup) connection to an IEC 60870-5-

104 master for the redundancy method 

IEC 60870-5-104

•

Client IP:Port:

IP address and TCP port number of the IEC 60870-5-104 master that 

is currently connected or was last connected

•

Received messages:

Counter of the received IEC 60870-5-104 telegrams without U and S 

control telegrams

•

Sent messages:

Counter of the sent IEC 60870-5-104 telegrams without U and S 

control telegrams

•

Event overflows:

Counter of the energy buffer

Example: The connection to the IEC 60870-5-104 master is inter-

rupted. The number of messages that cannot be transmitted increas-
es to 200 entries. For additional messages, the oldest entries are 
overwritten by new entries.

•

Errors:

Counter of the errors for IEC 60870-5-104 communication

•

Last error code:

Last IEC 60870-5-104 communication error code is put out as text in 

English.

SICAM-MMU_7KG9663_US.book  Page 198  Monday, December 7, 2015  12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Reviews:

No comments