7 Operation
7.3 Configuration of the Device
107
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Parameterizing a Group Indication
To change, for example, group indication 1, proceed as follows:
✧
In the navigation window, select the
Operational
parameters
menu, then the
Select automation
functions
submenu and click
Group indications 1-4
.
Figure 7-32
Configure Tab, Group Indications Input/Output Window (Detail)
✧
Select the desired parameters in the list boxes and option fields as described in Table 7-6.
✧
After the parameterization click
Send
.
The parameters are transmitted to the device but not enabled yet (passive set of parameters).
✧
If you do not want to make any additional settings, continue with the
Activation
of the device configuration
according to section
Activating the Set of Parameters
. If you want to change other settings, enter the
changes and then enable the device configuration as described in section
NOTE
If you select
-none-
for all 4 indications of a group indication, the respective group indication is inactive.
You can also integrate group indications into subordinated group indications, for example group indication 1 in
group indication 3.
SICAM-MMU_7KG9663_US.book Page 107 Monday, December 7, 2015 12:22 PM