manualshive.com logo in svg

Siemens SICAM MMU 7KG9663, Device Manual, Page: 87 / 262

Share
Download
Siemens SICAM MMU 7KG9663 Device Manual Download Page 87

7 Operation

7.3 Configuration of the Device

87

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

✧

Select the 

Prepare

 menu in the navigation window and then either 

Get device configuration

 or 

Open 

configuration from file

.

7.3.1.1

Get Device Configuration

If you have selected 

Get device configuration

 in the 

Configure

 tab, you can open and edit either the 

Get 

active configuration

 or the 

Get default configuration

 in the input/output window. Proceed as follows:

Fig. 7-11

Configure Tab, Get Device Configuration

Get Active Configuration and Editing

✧

Click 

Get active configuration

.

A copy of the active set of parameters (= passive set of parameters) of the device is opened for editing.

✧

Check and, if necessary, change the set parameters by opening the desired 

Operational

 menu described 

in chapter 7.3.4 and the 

Administrative

 menu according to chapter 7.3.3.

✧

Activate the modified configuration as described in chapter 7.3.1.3.

Get Default Configuration and Editing

✧

Click 

Get default configuration

.

A copy of the factory settings (= passive set of parameters) of the device is opened for editing.

NOTE

If you have selected 

Get device configuration

, an editable copy of the active set of parameters of the device 

is displayed on the screen. In the meantime, the active set of parameters in the device continues to operate. If 
you have selected 

Open configuration from file

, you can open and enable or edit the copy of a set of param-

eters that was already created and saved to a folder.

SICAM-MMU_7KG9663_US.book  Page 87  Monday, December 7, 2015  12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Reviews:

No comments