manualshive.com logo in svg

Siemens SICAM MMU 7KG9663, Device Manual, Page: 45 / 262

Share
Download
Siemens SICAM MMU 7KG9663 Device Manual Download Page 45

5 Getting Started

5.2 Assembly

45

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

5.2.2

Assembly

Mount the SICAM MMU to a DIN rail according to EN 60750 in the following way:

Fig. 5-2

Mounting on a DIN Rail

✧

Pull down the release device at the snap-in clip and hold it in this position.

✧

Slide the device with the guiding of the snap-in clip onto one side of the DIN rail.

✧

Move the device into the desired position on the DIN rail.

✧

Release the release device. The device is now firmly mounted on the DIN rail.

UL-certification conditions

Field Wires of Control Circuits shall be separated from other circuits with respect to the end use requirements!

Snap-in clip

Guiding of the
snap-in clip

DIN rail

Release device

Pulling direction

NOTE

The snap-in clip is adjusted to a certain height setting by the manufacturer. You can change this setting if nec-
essary. To do so, lever the release device out of its guiding (no special tool required) and move the release 
device into the desired position. Subsequently, press the release device back into its guiding.

SICAM-MMU_7KG9663_US.book  Page 45  Monday, December 7, 2015  12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Reviews:

No comments