7 Operation
7.2 Start and Design of the User Interface
77
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
7.2
Start and Design of the User Interface
7.2.1
Initial Start of the User Interface
Requirements
Before starting the User Interface, the following preconditions must be satisfied:
✧
Assemble the SICAM MMU as described in chapter 5.2.
✧
Connect the lines for measurement, communication and supply voltage as described in chapter 5.3 and
observe the safety provisions.
✧
Switch on the devices needed for the measurement.
✧
Switch on the supply voltage of the SICAM MMU.
✧
Check whether the LEDs at the SICAM MMU indicate that the device is ready (see chapter 12.3).
✧
Match the IP address and the subnet mask of the network interface card of your computer to the device
settings.
✧
Check on the computer screen whether the LAN connection is up. Activate the LAN connection if it is down
(see the Windows manual or the Windows online help for information).
✧
For checking purposes, carry out the ping test as follows (example for Windows XP):
−
Click
Start
on the Windows interface.
−
Select
Execute...
.
−
Enter
cmd
in the dialog and click
OK
.
−
Enter:
ping 192.168.0.55
.
−
Press
Enter
.
−
Check the following output in the window.
Fig. 7-1
Ping Test
✧
Start Microsoft Internet Explorer.
✧
Enter the IP address in Microsoft Internet Explorer (e.g. default IP address: http://192.168.0.55) of
SICAM MMU and press ENTER.
The User Interface opens with the
Information
tab
→
Show device information
SICAM-MMU_7KG9663_US.book Page 77 Monday, December 7, 2015 12:22 PM