Changing the Retry Interval for OMN
Changing System Settings
G281-0507-00
,
April 15, 1998
8-4
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
lleg_sa.c08
Office PhoneMail will now prompt you to enter the number of the parameter you
wish to change.
4.
At the system prompt, enter the number for the retry attempts parameter:
.
Office PhoneMail will confirm your selection.
5.
At the system prompt, enter the new value for this parameter (any number from 0 to 9).
Office PhoneMail will request confirmation of your new setting.
6.
At the system prompt, accept the new setting by pressing
.
To cancel and re-enter the new setting, press
.
8.6
Changing the Retry Interval for OMN
As System Administrator, you also set the interval between OMN retry attempts — that is, the
length of time the system will wait between attempts to reach a subscriber at one or both pro-
grammed OMN numbers. If Office PhoneMail is unsuccessful in reaching the subscriber at ei-
ther OMN number after the number of retry attempts you have specified for the system, it will
not try again until another new message arrives.
●
To set the retry interval for OMN:
1.
Log into your mailbox and access the system administration menu.
2.
Elect to perform Maintenance Administration procedures by pressing
.
3.
At the system prompt, enter the maintenance password:
(MAINTAIN).
14 is the number for the OMN retry attempts parameter.
The default value for this parameter is 0 retry attempts. You can specify any value for
this parameter between 0 and 9.
Office PhoneMail will not prompt you with this menu choice.
1 4
8
6
2
4
6
8
2
4
6
