manualshive.com logo in svg

Sharp MX-M6570, User Manual

Share
Download
Sharp MX-M6570 User Manual Download Page 45

1-42

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

MOTION SENSOR

This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from 
sleep mode (Motion Sensor Mode Only).
Three settings are available for the detection range (

/

/

).

• The motion sensor detects the movement of sources of heat.
• The detection range may vary depending on the installation site and environment (ambient temperature, etc.).

The motion sensor may not operate correctly in the conditions below.

• An object is in front of the motion sensor
• There are scratches or dirt on the motion sensor cover
• The motion sensor is directly exposed to sunlight or air flow
• The motion sensor is damaged
• There is a source of heat such as a heater nearby
• An object is moving in the detection range

To enable the motion sensor

"Settings (administrator)" select [System Settings] 

→

 [Energy Save] 

→

 [Eco Setting] 

→

 [Sleep Mode Power Level].

Motion sensor

Near

Far

Detection range

Approx. 
maximum 
1.5 m

60 degrees

Summary of Contents for MX-M6570








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands