manualshive.com logo in svg

Sharp MX-M6570, User Manual

Share
Download
Sharp MX-M6570 User Manual Download Page 175

1-172

BEFORE USING THE MACHINE

►

PERIPHERAL DEVICES

FINISHER (LARGE STACKER)

This device outputs sorted paper while staggering each set of paper. As needed, it staples each set. To punch holes in 
printed paper, install an optional hole punch module.

PART NAMES

(1)

Staple compiler

This temporarily stacks paper to be stapled.

(2)

Output tray

Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on 
large-size paper (12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" 
× 13", A3W, A3 and B4 sizes).

(3)

Middle output tray

Output paper that will not be offset in this tray.
The tray is slidable. Extend the tray for printing on 
large-size paper (12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" 
× 13", A3W, A3 and B4 sizes).

(4)

Front cover

Open this cover to replace the staple cartridge or remove 
a staple jam.

(2)

(1)

(3)

(4)

• To install a finisher (large stacker), a paper pass unit is required.
• A finisher (large stacker) cannot be installed simultaneously with an inner finisher, finisher, saddle stitch finisher or saddle 

stitch finisher (large stacker).

• Do not place heavy objects on the finisher (large stacker) or press down on the finisher (large stacker).
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.

Summary of Contents for MX-M6570








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands