manualshive.com logo in svg

Sharp MX-M6570, User Manual

Share
Download
Sharp MX-M6570 User Manual Download Page 38

1-35

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

Fix transition time.

The Auto Power-Off transition time is fixed.
When this setting is enabled, the [Change transition time by time of day.] option is disabled. 

Change transition time by time of day.

This function controls the transition to Auto Power Shut-Off mode optimally for each time period by analyzing the use of 
the machine based on job logs obtained during a 4-week period.
When this setting is enabled, the [Fix transition time.] option is disabled. 

Transition to Energy Saving and Auto Power Shut-Off modes

*  Factory default setting 

 If the Auto Power-Off is disabled, the time you have set here is disabled. 

• The image transfer control settings are not changed.
• This does not link to the Power On/Off Scheduling. If both of them are enabled, the Power On/Off Scheduling settings 

precede.

• Pages are counted for each paper size separately.
• When the power supply of the machine was off, there was no job during this time.

Pattern

Transition time

Average outputs per 

hour *

Mode1 (Job Start 
Priority1)

After 1 hour

1,000 or more 

Mode2 (Job Start 
Priority2)

After 30 minutes

250 to 999

Mode3 (Energy Saving 
Priority1)

After 5 minutes

60 to 249

Mode4 (Energy Saving 
Priority2)

After the minimum time period

Up to 59

Sleep Mode Power 
Level

Low Power:

The machine switches to the power saving mode, 
but it takes some time to recover.

Fast Wake Up: Compared with Low Power, the power value rises 

by a certain degree, but it results in faster 
recovery.

Motion Sensor: This enables switching of power saving modes by 

the motion sensor.

–

Summary of Contents for MX-M6570








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands