manualshive.com logo in svg

Sharp MX-M6570, User Manual

Share
Download
Sharp MX-M6570 User Manual Download Page 187

1-184

BEFORE USING THE MACHINE

►

PERIPHERAL DEVICES

SADDLE STITCH FINISHER (LARGE 
STACKER)

This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function 
that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the 
sheets in half, and the paper folding function that folds paper in half.
To punch holes in printed paper, install an optional hole punch module.

PART NAMES

(1)

Staple compiler

This temporarily stacks paper to be stapled.

(2)

Output tray

Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on 
large-size paper (12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" 
× 13", A3W, A3 and B4 sizes).

(3)

Middle output tray

Output paper that will not be offset in this tray.
The tray is slidable. Extend the tray for printing on 
large-size paper (12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" 
× 13", A3W, A3 and B4 sizes).

(4)

Saddle stitch tray 

Saddle-stitched output is delivered to this tray.

(5)

Front cover

Open this cover to replace the staple cartridge or remove 
a staple jam.

(2)

(4)

(1)

(5)

(3)

• To install a saddle stitch finisher (large stacker), a paper pass unit is required.
• Do not place heavy objects on the saddle stitch finisher (large stacker) or press down on the saddle stitch finisher (large 

stacker).

• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A saddle stitch finisher (large stacker) cannot be installed simultaneously with an inner finisher, finisher, finisher (large 

stacker) or saddle stitch finisher.

Summary of Contents for MX-M6570








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands