Sharp MX-M282N, Operation Manual

Page: 731 / 870

7-35
SYSTEM SETTINGS
Contents
*1 When an automatic document feeder is installed.
*2 When a saddle stitch finisher is installed.
*3 When a finisher (large stacker) is installed.
*4 When a large capacity tray is installed.
*5 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed.
*6 When a saddle stitch finisher or finisher is installed.
*7 When a punch module is installed.
Copy Function Settings
X
Disabling of Finisher *
6
Disabled 7-70
X
Disabling of Offset Disabled 7-70
X
Disabling of Stapler *
6
Disabled 7-70
X
Disabling of Punch *
7
Disabled 7-70
●
Fusing Control Settings 60 - 89
g
/m
2
(16 - 23 lbs.) 7-70
Item Factory default setting Page
■
Copy Function Settings
7-71
●
Initial Status Settings
7-71
X
Paper Tray Varies depending on the machine
configuration
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output –
●
Other Settings 7-72
X
Copy Exposure Adjustment 5 7-72
X
Rotation Copy Setting Enabled 7-72
X
Add or Change Extra Preset Ratios – 7-72
X
Setting a Maximum Number of Copies 999 7-72
X
Initial Margin Shift Setting
7-72
‹
Side 1 10 mm (1/2")
‹
Side 2 10 mm (1/2")
X
Erase Width Adjustment
7-72
‹
Edge Clearance Width 10 mm (1/2")
‹
Centre Clearance Width 10 mm (1/2")
X
Card Shot Settings
7-72
‹
Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
‹
Fit to Page Disabled
X
Automatic Saddle Stitch * Enabled 7-72
X
Initial Tab Copy Setting 10 mm (1/2") 7-72
Item Factory default setting Page