Sharp MX-M282N Operation Manual Download Page 280

Page: 280 / 870

2-122

COPIER

Contents

Insert the originals face up in the
document feeder tray.

●

When "Same Width" is used

Place the originals with the sides that are the same length
aligned on the left.

●

When "Different Width" is used

Place the originals with the corners aligned in the far left corner
of the document feeder tray.

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the

keys to switch through the screens.

(3) Touch the [Mixed Size Original] key.

☞

Special modes menu (2nd screen)

(page 2-42)

Select Mixed Size Original settings.

(1) Touch the [Same Width] key or the

[Different Width] key as appropriate for the
originals.

(2) Touch the [OK] key.

You will return to the base screen of copy mode.

A3 (11" x 17")

A4 (8-1/2" x 11")

Place with the sides that are the same
length aligned on the left.

(8-1/2" x 14")

A3 (11" x 17")

B4
(8-1/2" x 14")

Place the originals
aligned to the far left
corner.

Cancel

Same Width

Different

Width

Special Modes

Mixed Size Original

Place the same width

originals.

(1)

(2)

Summary of Contents for MX-M282N







































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M282N

Reviews:

Related manuals for MX-M282N

Brands by name

Popular brands

Sharp MX-M282N, Operation Manual

Search results

Summary of Contents for MX-M282N

Reviews:

Related manuals for MX-M282N

Brands by name

Popular brands