Command Reference
OSPFv3 Commands
Description
3.12 distribute-list in
Use this command to filter routes that are computed based on Link State Advertisement (LSA). Use
the
no
form of this command to restore the default setting.
distribute-list
{
name
|
prefix-list
prefix-list-name
}
in
[
interface-type
interface-number
]
no distribute-list
{
name
|
prefix-list
prefix-list-name
}
in
[
interface-type interface-number
]
Parameter
Description
Parameter
Description
name
Specifies an ACL filtering rule.
prefix-list
prefix-list-name
Specifies a prefix list filtering rule.
interface-type
interface-number
Specifies an interface on which LSA-based routes are filtered.
Defaults
Routes are not filtered by default.
Command
Mode
Routing process configuration mode
Usage Guide
Filter the routes computed based on LSA. Only the routes meeting filtering conditions can be
forwarded. Route filtering does not affect the link state database and the routing tables of the
neighbors. The ACL and prefix list filtering rules cannot be set at the same time. You can set only the
ACL filtering rule or the prefix list filtering rule for a specific interface.
The routing filtering rules affect only forwarding of local routes but not route computation based on
LSA. When route filtering is configured on an ABR, LSA can still compute routes and generate and
send inter-area LSAs with prefixes to other areas. This will cause blackhole routes. To prevent the
generation of blackhole routes, you can run the
area range
command with the
not-advertise
keyword.
Configuration
Examples
The following example filters routes that are computed based on Link State Advertisement (LSA).
Ruijie(config)# ipv6 prefix-list aaa seq 10 permit 2001::/64
Ruijie(config)# ipv6 router ospf 25
Ruijie(config-router)# redistribute rip metric 100
Ruijie(config-router)# distribute-list prefix-list aaa in ethernet 0/1
Related
Commands
Command
Description
area range
Configures route aggregation in an area.
Platform
Description
N/A
Summary of Contents for RG-S29 Series
