Ruijie RG-S29 Series, Command Reference Manual

Page: 174 / 1510

Command Reference Syslog Commands
logging trap [ level ]
no logging trap
Parameter
Description
Parameter Description
level
Severity of the log message. The name of the severity or the
numeral can be used. For the details of log severity, see Table 1.
Defaults The default is informational(6)
Command
Mode
Global configuration mode
Usage Guide To send logs to the Syslog Server, run the logging command in global configuration mode to
configure the Syslog Server . Then, run the logging trap command to specify the severity level of
logs to be sent.
The show logging command displays the configured related parameters and statistics of the log.
Configuration
Examples
The following example enables logs at severity 6 to be sent to the Syslog Server with the address of
202.101.11.22:
Ruijie(config)# logging 202.101.11.22
Ruijie(config)# logging trap informational
Related
Commands
Command Description
logging on Turns on the log switch.
logging Sends logs to the Syslog server.
show logging
Displays the log messages and related log configuration
parameters in the buffer.
Platform
Description
N/A
8.33 logging userinfo
Use this command to enable the logging function to record user log/exit. Use the no form of this
command to restore the default setting.
logging userinfo
no logging userinfo
Parameter
Description
Parameter Description
N/A N/A
Defaults No log message is printed recording user log/exit by default.