Ruijie RG-S29 Series, Command Reference Manual

Page: 375 / 1510

Command Reference MSTP Commands
Defaults The default is mstp .
Command
Mode Global configuration mode.
Usage Guide However, some vendors' devices do not work according to 802.1 protocol standards, possibly
causing incompatibility. If other vendors' devices are incompatible with Ruijie devices, run this
command to switch the STP mode to a lower version.
Configuration
Examples
The following example sets the STP version.
Ruijie(config)# spanning-tree mode stp
Related
Commands
Command Description
show spanning-tree
Displays the spanning-tree configuration.
Platform
Description
N/A
9.30 spanning-tree mst configuration
Use this command to enter the MST configuration mode in the global configuration mode and
configure the MSTP region. Use the no form of the command to restore the default setting.
spanning-tree mst configuration
no spanning-tree mst configuration
Parameter
Description
Parameter Description
N/A N/A
Defaults
Command
Mode
Global configuration mode.
Usage Guide To return to the privileged EXEC mode, enter end or Ctrl+C.
To return to the global configuration mode, enter exit.
After entering the MST configuration mode, you can configure MSTP Region parameters:
Configuration
Examples
This example enters the MST configuration mode.
Ruijie(config)# spanning-tree mst configuration
Ruijie(config-mst)# instance 1 vlan 3, 5-10