Ruijie RG-S29 Series, Command Reference Manual

Page: 802 / 1510

Command Reference OSPFv3 Commands
valid id range from 0 to 255.
Defaults Point-to-point network type: PPP, SLIP, frame relay point-to-point sub-interface and X.25
point-to-point sub-interface encapsulation.
NBMA network type: frame relay(except for the point-to-point sub-interface) and X.25 encapsulation
(except for the point-to-point sub-interface)
Broadcast network type: Ethernet encapsulation.
The point-to-multipoint network type is not the default type.
Command
Mode
Interface configuration mode.
Usage Guide You can set the network type of the interface according to the actual link type applied and the
topology.
Configuration
Examples
The following example sets the network type of the interface that participates in the OSPFv3 to
point-to-point.
Ruijie(config)# interface ethernet 1/0
Ruijie(config-if)# ipv6 ospf network point-to-point
Related
Commands
Command Description
ipv6 ospf priority
Sets the interface priority.
show ipv6 ospf interface Displays the OSPFv3 interface information.
ipv6 ospf area
Sets the interface to participate in the OSPFv3
routing process.
Platform
Description
N/A
3.27 ipv6 ospf priority
Use this command to set the interface priority. Use the no form of this command to restore the default
setting.
ipv6 ospf priority number-value [ instance instance-id ]
no ipv6 ospf priority [ instance instance-id ]
Parameter
Description
Parameter Description
number-value
The priority of the interface.
Its range is from 0 to 255.
instance instance-id
Configures the specific OSPFv3 instance on the interface. Its range is
from 0 to 255.