Ruijie RG-S29 Series, Command Reference Manual

Page: 1455 / 1510

Command Reference SNMP Commands
writeview
Specifies a write view for the SNMP group. This view enables you to
enter data and configure the contents of the agent.
aclnum
Access list number, which specifies the IPV4 addresses that are
permitted to access the MIB.
aclname
Name of the access list, which specifies the IPV4 addresses that are
permitted to access the MIB.
ipv6_aclname
Name of the IPv6 access list, which specifies the IPv6 addresses that
are permitted to access the MIB.
Defaults No SNMP groups are configured by default.
Command
mode
Global configuration mode.
Usage Guide N/A
Configuration
Examples
The following example configures a new SNMP group.
Ruijie(config)# snmp-server group mib2user v3 priv read mib2
Related
Commands
Command Description
show snmp group Displays the SNMP group configuration.
Platform
Description
N/A
1.10 snmp-server host
Use this command to specify the SNMP host (NMS) to send the trap message. Use the no form of
this command to remove the specified SNMP host.
snmp-server host { host-addr | ipv6 ipv6-addr } [ traps | informs ] [ version { 1 | 2c | 3 [ auth |
noauth | priv ] ] community-string [ udp-port port-num ] [ notification-type ]
no snmp-server host { host-addr | ipv6 ipv6-addr } [ traps | informs ] [ version { 1 | 2c | 3 { auth |
noauth | priv } ] community-string [ udp-port port-num ]
Parameter
Description
Parameter Description
host-addr SNMP host address
ipv6-addr SNMP host address(ipv6)
trap | informs
Enables the host to send the SNMP notification as traps or informs.
version SNMP version: V1, V2C or V3
auth | noauth | priv Security level of SNMPv3 users
community-string Community string or username (SNMPv3 version)