Ruijie RG-S29 Series, Command Reference Manual

Page: 406 / 1510

Command Reference LLDP Commands
Commands show interface status Displays LLDP status information.
Platform
Description
N/A
11.10 lldp fast-count
When a new neighbor is detected or when LLDP operating mode changes from shutdown or Rx to
TxRx or Tx, to allow the neighbor device to quickly study the information about this device, the fast
sending mechanism will be initiated. The fast sending mechanism shortens the LLDPDU sending
interval to 1 second and continuously transmits a certain number of LLDPDUs before restoring to the
normal transmit interval. Use the no form of this command to restore the default setting.
lldp fast-count value
no lldp fast-count
Parameter
Description
Parameter Description
value The number of fast sent LLDP packets, in the range from 1 to 10.
Defaults The default is 3.
Command
Mode
Global configuration mode.
Usage Guide N/A
Configuration
Examples
The following example sets the number of fast sent LLDP packets to 5.
Ruijie# config
Ruijie(config)# lldp fast-count 5
Related
Commands
Command Description
show interface status Displays LLDP status information.
Platform
Description
N/A
11.11 lldp hold-multiplier
Use this command to set the TTL multiplier. Use the no form of this command to restore to default
setting.
lldp hold-multiplier value
no lldp hold-multiplier
Parameter Parameter Description