Ruijie RG-S29 Series, Command Reference Manual

Page: 1255 / 1510

Configuration Guide NFPP Commands
Command
Mode
Interface configuration mode
Usage Guide
The attack threshold value shall be equal to or greater than the rate-limit threshold.
Configuration
Examples
The following example sets the rate-limit threshold and the attack threshold.
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp dhcpv6-guard policy per-src-mac 3 10
Ruijie(config-if)# nfpp dhcpv6-guard policy per-port 50 100
Related
Commands
Command Description
dhcpv6-guard attack-threshold Sets the global attack threshold.
dhcpv6-guard rate-limit Sets the global rate-limit threshold.
show nfpp dhcpv6-guard summary Displays the configuration.
show nfpp dhcpv6-guard hosts Displays the monitored host.
clear nfpp dhcpv6-guard hosts Clears the isolated host.
Platform
Description
N/A
21.72 nfpp icmp-guard enable
Use this command to enable the ICMP anti-attack function on the interface.
Use the no or default form of this command to restore the default setting.
nfpp icmp-guard enable
no nfpp icmp-guard enable
default nfpp icmp-guard enable
Parameter
Description
Parameter Description
N/A N/A
Defaults The ICMP anti-attack function is not enabled on the interface.
Command
Mode
Interface configuration mode
Usage Guide The interface ICMP anti- attack configuration is prior to the global configuration.
Configuration
Examples
The following example enables the ICMP anti-attack function on the interface.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp icmp-guard enable