Ruijie RG-S29 Series, Command Reference Manual

Page: 777 / 1510

Command Reference OSPFv3 Commands
area area-id encryption ipsec spi spi esp null [ md5 | sha1 ] [ 0 | 7 ] key
no area area-id encryption
Parameter
Description
Parameter Description
area-id
Specifies an area ID.
It can be an integer or the prefix of an IPv4 address.
spi
Specifies a security parameter index, in the range from 256 to
4294967295.
null Specifies the null encryption mode.
md5 Specifies the MD5 authentication mode.
sha1 Specifies the SHA1 authentication mode.
0
Indicates that a key is displayed in the plain-text format.
7 Indicates that a key is displayed in the cipher-text format.
Key Specifies an authentication key.
Defaults Encryption authentication is not performed by default.
Command
Mode
Routing process configuration mode
Usage Guide RGOS supports the null encryption mode and two authentication modes: MD5 and SHA1.
If encryption authentication is configured for an OSPFv3 area, the configuration takes effect on all
interfaces (except for those of virtual links) in the area. Encryption authentication configuration on
interfaces, however, takes precedence over that of the OSPFv3 area.
Configuration
Examples
The following example specifies null encryption and MD5 authentication for area 1 where OSPFv3
routing processes reside, and sets the authentication password to
aaaaaaaaaaaaaaaaaaaaaaaaaaaaa.
Ruijie(config-router)# area 1 encryption ipsec spi 300 esp null md5
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Related
Commands
Command Description
ipv6 ospf encryption
Specifies interface encryption authentication.
area virtual-link encryption Specifies virtual link encryption authentication.
Platform
Description
N/A
3.4 area-range
Use this command to set the range of the converged inter-area addresses. Use the no form of this