Ruijie RG-S29 Series, Command Reference Manual

Page: 785 / 1510

Command Reference OSPFv3 Commands
information.
show ipv6 ospf database
Displays the OSPFv3 link state database
information.
Platform
Description
N/A
3.10 default-metric
Use this command to set the default metric for the routes to be redistributed. Use the no form of this
command to restore the default setting
default-metric metric-value
no default-metric
Parameter
Description
Parameter Description
metric-value
Default metric for the routes to be redistributed.
Its range is from 1 to 16777214.
Defaults The default is 20.
Command
Mode The default route type is type 2.
Usage Guide This command can be used together with redistribute to set the default metric for the routes to be
redistributed. But this command does not apply to two types of routes:

The default route generated with default-information originate;

The redistributed direct route, for which 20 is always the default metric value.
Configuration
Examples
The following example sets the default metric for the routes to be redistributed to 10.
Ruijie(config)# ipv6 router ospf 1
Ruijie(config-router)# default-metric 10
Related
Commands
Command Description
redistribute
Redistributes the routes.
show ipv6 ospf
Displays the OSPFv3 routing process
information.
Platform
Description
N/A