Ruijie RG-S29 Series, Command Reference Manual

Page: 1194 / 1510

Configuration Guide IPv6 Source Guard Commands
Ruijie(config)# ipv6 source binding 0000.0000.0001 vlan 1 1::1 ip-only
Ruijie(config)# end
Platform
Description
N/A
19.2 ipv6 verify source
Use this command to enable IPv6 source guard.
Use the no form of this command to restore the default setting.
ipv6 verify source [ port-security ]
no ipv6 verify source
Parameter
Description
Parameter Description
port-security Enables source IPv6-MAC filtering.
Defaults IPv6 source guard is disabled by default.
Command
Mode
Interface configuration mode
Usage Guide Use this command to enable IPv6 source guard with source IPv6 filtering or source IPv6-MAC filtering.
This command is supported only on Layer 2 ports, aggregate ports and encapsulated sub interfaces.
Currently, the IPv6 source guard feature of Ruijie devices filters traffic based on the DHCPv6 Snooping
database or on manually configured IPv6 source bindings. A port with only IPv6 source guard enabled
cannot realize normal network access for connected hosts.
Configuration
Examples
The following example enables IPv6 source guard based on source IPv6 filtering.
Ruijie# configure terminal
Ruijie(config)# interface GigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)# ipv6 verify source
Ruijie(config-if)# end
The following example enables IPv6 source guard based on source IPv6-MAC filtering.
Ruijie# configure terminal
Ruijie(config)# interface GigabitEthernet 0/2
Ruijie(config-if-GigabitEthernet 0/2)# ipv6 verify source port-security
Ruijie(config-if)# end
Platform N/A