Ruijie RG-S29 Series, Command Reference Manual

Page: 1419 / 1510

Command Reference VRRP Plus Commands
5.5 vrrp load-balancing
Use this command to set the VRRP Plus load balancing policy.
Use the no form of this command to restore the default setting.
vrrp group load-balancing { host-dependent | round-robin | weighted
no vrrp group load-balancing { host-dependent | round-robin | weighted }
Parameter
Description
Parameter Description
group Specifies the VRRP group ID.
host-dependent
Sets the host-dependent load balancing policy, so as to use the
different virtual MACs to reply the host’s ARP request based on
different hosts.
round-robin
Sets the round-robin balancing policy, so as to use the different virtual
MACs to reply the
host’s ARP request in turn, which is the default
setting.
weighted
Sets the weight balancing policy, so as to perform the ARP reply
based on the device weight of the backup group.
Defaults The default is round-robin.
Command
Mode
Interface configuration mode
Usage Guide N/A
Configuration
Examples
The following example sets the load balancing policy of the VRRP Plus group1 on Layer 3 interface
GigabitEthernet0/0 as host-dependent.
Ruijie# config t
Ruijie(config)# interface GigabitEthernet 0/0
Ruijie(config-if-GigabitEthernet 0/0)# vrrp 1 ip 192.168.1.1
Ruijie(config-if-GigabitEthernet 0/0)# vrrp 1 balance
Ruijie(config-if-GigabitEthernet 0/0)# vrrp 1 load-balancing host-dependent
Related
Commands
Command Description
vrrp group balance Enables the VRRP Plus function.
show vrrp balance [ brief | grou p ] Displays the VRRP Plus running status.
show vrrp balance interface type number [ brief ]
Displays the VRRP Plus running status o the
specified interface.
Platform
Description
N/A