Ruijie RG-S29 Series, Command Reference Manual

Page: 551 / 1510

Command Reference DHCP Commands
interface-number }
no dns-server
Parameter
Description
Parameter Description
ip-address
Defines the IP address of the DNS server. At least one IP address
should be configured.
ip-
address2…ip-address8
(Optional) Up to 8 DNS servers can be configured.
use-dhcp-client interface-type
interface-number
Uses the DNS server learned by the DHCP client of the RGOS
software as the DNS server of the DHCP client.
Defaults No DNS server is defined by default.
Command
Mode
DHCP address pool configuration mode.
Usage Guide When more than one DNS server is defined, the former will possess higher priory, so the DHCP client
will select the next DNS server only when its communication with the former DNS server fails.
If the RGOS software also acts as the DHCP client, the DNS server information obtained by the client
can be transmitted to the DHCP client.
Configuration
Examples
The following example specifies the DNS server 192.168.12.3 for the DHCP client.
dns-server 192.168.12.3
Related
Commands
Command Description
domain-name Defines the suffix domain name of the DHCP client.
ip address dhcp Enables the DHCP client on the interface to obtain the IP address information.
ip dhcp pool
Defines the name of the DHCP address pool and enters the DHCP address
pool configuration mode.
Platform
Description
N/A
4.14 domain-name
Use this command to define the suffix domain name of the DHCP client in the DHPC address pool
configuration mode. Use the no form of this command to restore the default setting.
domain-name domain-name
no domain-name
Parameter
Description
Parameter Description
domain-name Defines the suffix domain name string of the DHCP client.
Defaults No suffix domain name by default.