Ruijie RG-S29 Series, Command Reference Manual

Page: 53 / 1510

Command Reference Basic Configuration Management Commands
been loaded when you run the write [ memory ] command.
Configuration
Examples
The following example saves running-config at a specified location.
Ruijie# write
Building configuration...
[OK]
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
2.53 zcm
Use this command to enable and disable the zero configuration function.
zcm { enable | disable }
Parameter
Description
Parameter Description
enable Enables the zero configuration function.
disable Disables the zero configuration function.
Defaults The zero configuration function is disabled by default.
Command
Mode
Privileged EXEC mode
Usage Guide
The zero configuration function is applicable to the ACS solution only.
The zero configuration function is applicable to standalone systems only.
With the zero configuration function, DHCP Snooping Trust is enabled only on the last two
electrical ports and all SFP ports of the device by default, regardless of whether the device
supports the MGMT port.
Enabling and disabling the zero configuration function will delete the startup configuration file of
the device and trigger device restart.
Configuration
Examples
The following example enables the zero configuration function.
Ruijie# zcm enable
%% Warning: After switching mode the device will automatically restart!
% Do you want to switch to zero configuration mode? [yes/no]:y
*Sep 29 12:36:20: %ZCM-5-MODE_SWITCH: The device is reloading due to zero or