Ruijie RG-S29 Series, Command Reference Manual, Page: 542 / 1510

Command Reference DHCP Commands
4 DHCP Commands
4.1 address range
Use this command to specify the network segment range of the addresses that can be allocated by
CLASS associated with DHCP address pool. Use the no form of this command to restore the default
setting.
address range low-ip-address high-ip-address
no address range
Parameter
Description
Parameter Description
low-ip-address Start address in the network segment range.
high-ip-address End address in the network segment range.
Defaults
By default, the associated CLASS is not configured with the network segment range. The default is
the address pool range.
Command
Mode
Address pool CLASS configuration mode.
Usage Guide Each CLASS corresponds to one network range which must be from low address to high address, so
as to allow the duplication of network segment range between multiple CLASSes. If the CLASS
associated with the address pool is specified without configuring the corresponding network segment
range, the default network segment range of this CLASS is same as the range of the address pool
where this CLASS is.
Configuration
Examples
The following example configures the network segment of class1 associated with address pool
mypool0 ranging from 172.16.1.1 to 172.16.1.8.
Ruijie(config)#
ip dhcp pool
mypool0
Ruijie(dhcp-config)# class class1
Ruijie (config-dhcp-pool-class)# address range 172.16.1.1 172.16.1.8
Related
Commands
Command Description
ip dhcp pool
Defines the name of the DHCP address pool and enters the DHCP
address pool configuration mode.
class
Configures the CLASS associated with the DHCP address pool and
enters the address pool CLASS configuration mode.
Platform
Description
N/A