Ruijie RG-S29 Series, Command Reference Manual

Page: 568 / 1510

Command Reference DHCP Commands
Defaults Enabled
Command
Mode
This function is enabled by defualt.
Usage Guide N/A
Configuration
Examples
The following example enables the CLASS to allocate addresses.
Ruijie(config)# ip dhcp use class
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
4.36 ip helper-address
Use this command to add an IP address of the DHCP server. Use the no form of this command to
delete an IP address of the DHCP server.
The server address can be configured globally or on a specific interface. Therefore, this command
can run in the global configuration mode or the interface configuration mode to add the DHCP server
information.
ip helper-address { cycle-mode | A.B.C.D }
no ip helper-address { cycle-mode | A.B.C.D }
Parameter
Description
Parameter Description
cycle-mode Forwards the DHCP request packets to all DHCP servers.
A.B.C.D DHCP server IP address
Defaults N/A
Command
Mode
Global configuration mode, interface configuration mode.
Usage Guide Up to 20 DHCP server IP addresses can be configured globally or on a layer-3 interface.
One DHCP request of this interface will be sent to these servers. You can select one for confirmation.
Configuration
Examples
The following example sets the IP address for the global server to 192.168.1.1
Ruijie# configure terminal
Ruijie(config)# ip helper-address 192.168.1.1