Ruijie RG-S29 Series, Command Reference Manual

Page: 476 / 1510

Command Reference IP Address/Service Commands
Commands N/A N/A
Platform
Description
N/A
1.8 ip source-route
Use this command to allow the RGOS software to process an IP packet with source route information
in global configuration mode. Use the no form of this command to disable this function.
ip source-route
no ip source-route
Parameter
Description
Parameter Description
N/A N/A
Defaults This function is enabled by default.
Command
Mode
Global configuration mode.
Usage Guide RGOS supports IP source route. When the device receives an IP packet, it will check the options of
the IP packet, such as strict source route, loose source route and record route. Details about these
options can be found in RFC 791. If an option is found to be enabled in this packet, a response will be
made. If an invalid option is detected, an ICMP parameter problem message will be sent to the data
source, and then this packet is discarded.
Configuration
Examples
The following example disables the IP source route.
Ruijie(config)# no ip source-route
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
1.9 ip ttl
Use this command to set the TTL value of the unicast packet. Use the no form of this command to
restore the default setting.
ip ttl value
no ip ttl
Parameter Parameter Description