Ruijie RG-S29 Series, Command Reference Manual

Page: 281 / 1510

Command Reference Interface Commands
Defaults This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide After this command is configured, all interface indexes are saved in the configuration file. After the
device is restarted, interface indexes remain the same as before.
Configuration
Examples
The following example enables the interface index persistence.
Ruijie(config)# snmp-server if-index persist
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
1.32 speed
Use this command to configure the speed on the port. Use the no form of this command to restore the
default setting.
speed [ 10 | 100 | 1000 | auto ]
Parameter
Description
Parameter Description
10 The transmission rate of the interface is 10Mbps.
100 The transmission rate of the interface is 100Mbps.
1000 The transmission rate of the interface is 1000Mbps.
auto Self-adaptive
Defaults The default is auto .
Command
Mode
Interface configuration mode.
Usage Guide If an interface is the member of an aggregate port, the rate of the interface depends on the rate of the
aggregate port. You can set the rate of the interface, but it does not take effect until the interface exits
the aggregate port. Use show interfaces to display configuration. The rate varies by interface types.
For example, you cannot set the rate of a SFP interface to 10M or 100M.
Configuration
Examples
The following example sets the speed on interface gigabitethernet 1/1 to 100Mbps.
Ruijie(config)# interface gigabitethernet 1/1