Ruijie RG-S29 Series, Command Reference Manual

Page: 700 / 1510

Command Reference OSPFv2 Commands
Parameter
Description
Parameter Description
area-id
ID of the OSPF transition area. The value can be a decimal integer or
an IP address.
router-id
ID of the router neighboring to the virtual link. It can be viewed with
the show ip ospf command.
dead-interval seconds
(Optional) Defines the time to declare neighbor loss in seconds. The
range is 0 to 2147483647.This value must be consistent with that of
the neighbor.
minimal Enables the Fast Hello function and sets the death clock to 1 second.
hello-multiplier Multiplies dead-interval with hello-interval in the Fast-Hello function.
multiplier
Specifies the number of Hello packets that are sent every second in
the Fast Hello function. The range is from 3 to 20.
hello-interval seconds
(Optional)Defines the interval at which the HELLO packet is sent by
the OSPF to the virtual link in seconds. The range is from1 to
65535.This value must be consistent with that of the neighbor.
retransmit-interval seconds
(Optional) OSPF LSA retransmission interval in seconds. The range
is from 0 to 65535. The parameter setting must consider the
round-trip time of packets on the link.
transmit-delay seconds
(Optional) OSPF LSA transmission delay in seconds. The range is
from 0 to 65535. This value adds the LSA keep alive period. When
the LSA keep alive period reaches a threshold, the LSA will be
refreshed.
authentication-key [0|7] key
(Optional) Defines the OSPF plain text authentication key. The plain
text authentication key between neighbors must be the same. The
service password-encryption command enables the key to be
displayed in encrypted manner.
0 indicates that the key is displayed in plain text.
7 indicates that the key is displayed in cipher text.
message-digest-key
key-id md5 [0|7 ] key
(Optional) Defines the OSPF MD5 authentication key and key ID. The
MD5 authentication key ID and key between neighbors must be the
same. The service password-encryption command enables the key to
be displayed in encrypted manner.
0 indicates that the key is displayed in plain text.
7 indicates that the key is displayed in cipher text.
authentication Sets the authentication type to plain text.
message-digest Sets the authentication type to MD5.
null
Sets the authentication type to no authentication.
Defaults The following are the default values:
dead-interval: 40seconds
hello-interval: 10seconds
retransmit-interval: 5seconds