Ruijie RG-S29 Series, Command Reference Manual

Page: 590 / 1510

Command Reference DHCPv6 Commands
Description
5.4 ipv6 dhcp client pd
Use this command to enable the DHCPv6 client and request for the prefix address information.
Use the no form of this command to restore the default setting.
ipv6 dhcp client pd prefix-name [ rapid-commit ]
no ipv6 dhcp client pd
Parameter
Description
Parameter Description
prefix-name Defines the IPv6 prefix name.
rapid-commit Allows the two-message interaction process.
Defaults This function is disabled by default.
Command
Mode
Interface configuration mode
Usage Guide With the DHCPv6 client mode disabled, use this command to enable the DHCPv6 client mode on the
interface.
With the ipv6 dhcp client pd command enabled, the DHCPv6 client sends the prefix request to the
DHCPv6 server
The keyword rapid-commit allows the client and the server two-message interaction process. With
this keyword configured, the solicit message sent by the client includes the rapid-commit item.
Configuration
Examples
The following example enables the prefix information request on the interface.
Ruijie(config)# interface fastethernet 0/1
Ruijie(config-if)# ipv6 dhcp client pd pd_name
Related
Commands
Command Description
clear ipv6 dhcp client
Resets the DHCPv6 client function on the
interface.
show ipv6 dhcp interface Displays the DHCPv6 interface configuration.
Platform
Description
N/A
5.5 ipv6 dhcp relay destination
Use this command to enable the DHCPv6 relay service and configure the destination address to
which the messages are forwarded.
Use the no form of this command to restore the default setting.
ipv6 dhcp relay destination ipv6-address [ interface-type interface-number ]