Configuration Guide RADIUS Commands
Configuration
Examples
The following example disables access-request packets to contain attribute NAS-PORT-ID.
Ruijie(config)# radius-server authentication attribute 87 unpackage
Platform
Description
N/A
2.13 radius-server authentication vendor
Use this command to enable access-request packets to contain vendor-specific RADIUS attributes.
Use the
no
or
default
form of this command to restore the default setting.
radius-server authentication vendor
vendor_name
package
no radius-server authentication vendor
vendor_name
package
default radius-server authentication vendor
vendor_name
package
Parameter
Description
Parameter
Description
vendor_name
cmcc/ microsoft/cisco
Defaults
Access-request packets do not contain vendor- specific RADIUS attributes by default.
Command
Mode
Global configuration mode
Usage Guide
Use this command to enable access-request packets to contain vendor- specific RADIUS attributes.
Configuration
Examples
The following example enables access-request packets to contain
“cmcc”.
Ruijie(config)# radius-server authentication vendor cmcc package
Platform
Description
N/A
2.14 radius-server dead-criteria
Use this command to configure criteria on a device to determine that the Radius server is
unreachable.
Use the
no
form of this command to restore the default setting.
radius-server dead-criteria
{
time
seconds
[
tries
number
]
| tries
number
}
no radius-server dead-criteria
{
time
seconds
[
tries
number
]
| tries
number
}
Parameter
Description
Parameter
Description
time
seconds
Configures the timeout value. If the device does not receive a correct
Summary of Contents for RG-S29 Series
