Ruijie RG-S29 Series, Command Reference Manual

Page: 808 / 1510

Command Reference OSPFv3 Commands
router ipv6 ospf 1
max-concurrent-dd 4
Related
Commands
Command Description
ipv6 router ospf max-concurrent-dd
Sets the maximum concurrent interacting
neighbors allowed in the OSPFv3 processes.
Platform
Description
N/A
3.34 passive-interface
Use this command to set the passive interface. Use the no form of this command to restore the
default setting.
passive-interface { default | interface-type interface-number }
no passive-interface { default | interface-type interface-number }
Parameter
Description
Parameter Description
default Sets all the interfaces to passive ones.
interface-type
interface-number
Sets the specified interface to a passive one.
Defaults No passive interface is set by default.
Command
Mode
Routing process configuration mode
Usage Guide After an interface is set to a passive one, it no longer receives or sends the hello message.
This command applies to the interfaces participating in the OSPFv3 but not to the virtual links.
Configuration
Examples
The following example enables only the VLAN1 interface to participate in the OSPFv3 process.
Ruijie(config)# ipv6 router ospf 1
Ruijie(config-router)# passive-interface default
Ruijie(config-router)# no passive-interface vlan 1
Related
Commands
Command Description
ipv6 ospf area
Configures an interface to participate in the
OSPFv3 routing process.
show ipv6 ospf
Displays the OSPFv3 routing process
information.