Ruijie RG-S29 Series, Command Reference Manual

Page: 55 / 1510

Command Reference Line Commands
3 Line Commands
3.1 absolute-timeout
Use this command to set the absolute timeout period. Use the no form of this command to restore the
default setting.
absolute-timeout minutes
no absolute-timeout
Parameter
Description
Parameter Description
minutes Sets the absolute timeout period, in the range from 0 to 60.
Defaults No absolute timeout period is set by default.
Command
Mode
LINE configuration mode
Usage Guide If the absolute timeout period is configured, the line is disconnected once the timeout timer expires,
Before the terminal logs out, a message is displayed to prompt the remaining time.
Terminal will be login out after 20 second
Configuration
Examples
The following example sets the timeout period for the line between two consoles to 2 minutes.
Ruijie(config)# line console 0
Ruijie(config-line)#absolute-timeout 2
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
3.2 access-class
Use this command to control login into the terminal through IPv4 ACL. Use the no form of this
command to restore the default setting.
access-class { access-list-number | access-list-name } { in | out }
no access-class { access-list-number | access-list-name } { in | out }
Parameter Parameter Description