Command Reference
Protocol-independent Configuration Commands
router ospf
redistribute rip subnets route-map redrip
network 192.168.12.0 0.0.0.255 area 0
access-list 5 permit 192.168.100.1
route-map redrip permit 10
match ip route-source
Related
commands
Command
Description
access-list
Set the access list.
match ip address
Match the IP address in the access list.
match interface
Match the next-hop interface of the route.
match ip next-hop
Match the next-hop IP address in the access list.
match metric
Match the metric.
match route-type
Match the route type.
match tag
Match the tag.
set metric
Set the metric.
set metric-type
Set the metric type.
set tag
Set the tag.
6.19 match ipv6 address
Use this command to redistribute the network routes permitted in the IPv6 access list or the IPv6 prefix
list. Use the
no
form of this command to delete the setting.
match ipv6 address
{
access-list-name
]
|
prefix-list
prefix-list-name
}
no match ipv6 address
Parameter
description
Parameter
Description
access-list-name
Name of the access list.
prefix-list
prefix-list-name
Specify the IPv6 prefix list to match.
Default
configuration
None
Command
mode
Route map configuration mode
Usage
guideline
You can redistribute the routing information from one routing process to another routing process. For
example, you can redistribute the route in the OSPF routing domain and then advertise it to the RIP
routing domain, and vice versa. The mutual route redistribution can be implemented between all the
IP routing protocols.
In the route redistribution, route maps are usually used to control the mutual route redistribution
Summary of Contents for RG-S29 Series
