Ruijie RG-S29 Series, Command Reference Manual

Page: 21 / 1510

Command Reference Basic Configuration Management Commands
privileged EXEC mode. A lost password that has been encrypted using any method cannot be
restored. In this case, you can only reconfigure the device password.
Configuration
Examples
The following example configures the password as pw10 .
Ruijie(config)# enable password pw10
Related
Commands
Command Description
enable secret
Sets the security password
Platform
Description
N/A
enable secret
Sets the security password
2.15 enable secret
Use this command to configure a security password for different privilege levels. Use the no form of
this command to restore the default setting.
enable secret [ level level ] { [ 0 ] password | 5 encrypted-secret }
no enable secret [ level level ]
Parameter
Description
Parameter Description
secret Password for the user to enter the EXEC configuration layer
level User's level.
0
The password is in plain text.
5 encrypted-password The password is encrypted.
Defaults N/A
Command
Mode
Global configuration mode
Usage Guide A password comes under two categories: "password" and "security". "Password" indicates a simple
password, which can be set only for level 15. "Security" means a security password, which can be set
for levels 0-15. If both types of passwords coexist in the system, no "password" type is allowed. If a
"password" type password is set for a level other than 15, the system gives an alert and the password
is automatically converted into a "security" password. If a "password" type password is set for level 15
and the same as a "security" password, an alert is given. The password must be encrypted, with
simple encryption for "password" type passwords and security encryption for "security" type
passwords.