Ruijie RG-S29 Series, Command Reference Manual

Page: 283 / 1510

Command Reference Interface Commands
form of this command to restore the default setting.
switchport access vlan vlan-id
no switchport access vlan
Parameter
Description
Parameter Description
vlan-id The VLAN ID at which the port to be added.
Defaults By default, the switch port is an access port and the VLAN is VLAN 1.
Command
Mode
Interface configuration mode.
Usage Guide Enter one VLAN ID. The system will create a new one and add the interface to the VLAN if you enter
a new VLAN ID. If the VLAN ID already exists, the command adds the interface to the VLAN.
If the port is a trunk port, the operation does not take effect.
Configuration
Examples
The following example configures interface gigabitethernet 1/1 as a statistic access port and adds it to
VLAN 2.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# switchport access vlan 2
Related
Commands
Command Description
switchport mode
Configures the interface as Layer 2 mode
(switch port mode).
switchport trunk
Configures a native VLAN and the
allowed-VLAN list for the trunkport.
Platform
Description
N/A
1.35 switchport mode
Use this command to specify a L2 interface (switch port) mode. You can specify this interface to be
an access port or a trunk port or an 802.1Q tunnel. Use the no form of this command to restore the
default setting.
switchport mode { access | trunk }
no switchport mode
Parameter
Description
Parameter Description
access Configures the switch port as an access port.