88
MATRIX channel operations
MATRIX channel operations
The parameters of the MATRIX channels can be operated in the
CHANNEL DISPLAY screen.
fig.ScrChDispMtxGuide.eps
1.
Attenuator
fig.ScrMtxATTGuide.eps
a. ATT knob
This adjusts the channel’s input level in the range of -48 dB–0
dB (6 dB steps).
b. OL (Overload) indicator
This will light red when the output of the attenuator exceeds the
OVER Lev setting specified in the METER SETUP popup (p.
122).
2.
Insert indication
fig.ScrChInsOut.eps
a. EXT FX
If an external effects processor is inserted, this shows the EXT
FX number that is inserted.
By moving the cursor to EXT FX and pressing [ENTER], you can
access the EXT FX tab of the EFFECTS screen.
Inserting an external effects processor into a channel is done in
the EFFECTS screen. For details, refer to “Inserting an external
effects device” (p. 137).
b. GEQ INS
If a GEQ is inserted, this shows the number of the GEQ that is
inserted.
If the number is shown in white, the inserted GEQ is enabled. If
it is shown in gray, the inserted GEQ is bypassed.
By moving the cursor to GEQ INS and pressing [ENTER], you
can access the GEQ 1-4 tab of the EFFECTS screen.
Inserting a GEQ into a channel is done in the EFFECTS screen.
For details, refer to “Inserting a 31-band GEQ” (p. 133).
c. FX INS
If FX1–FX4 is inserted, this shows the number of the inserted
FX.
If the number is shown in white, the inserted effect is enabled. If
it is shown in gray, the inserted effect is bypassed.
The character “L” or “R” may be added to the FX INS number.
This has the following significance.
By moving the cursor to FX INS and pressing [ENTER], you can
access the FX 1-4 tab of the EFFECTS screen.
Inserting an effect into a channel is done in the EFFECTS screen.
For details, refer to “Effect input/output settings” (p. 126).
Up to four effects can be inserted in a channel. In this case, they
are inserted in series in order of the FX number.
Operations in the CHANNEL
DISPLAY screen
CHANNEL DISPLAY screen
1
3
4 5
2
6
7
8
b
a
Normally, you can leave the attenuator at 0 dB. If an input is
overloading, you can avoid the overload by adjusting the
attenuator.
Indication
Explanation
L
The L side of the FX is inserted.
R
The R side of the FX is inserted.
Number only
Both L and R sides of the FX are inserted. The
return from the FX is mixed and input to the
channel.
a
b
c
M-400_v15_e.book 88 ページ ２００８年６月２０日 金曜日 午後４時５分
