84
AUX channel and MAIN L/R channel operations
AUX channel and MAIN L/R channel operations
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChAux.eps
2.
Press [F5 (GROUP ASSIGN)] to access the GROUP ASSIGN
popup.
fig.ScrChGroupAssign2.eps
1.
Access the GROUP ASSIGN popup for the desired channel.
fig.ScrChGroupAssign2.eps
2.
Verify that the target channel is correct.
3.
Move the cursor to the desired DCA group select button,
and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
For details on DCA groups, refer to “DCA groups” (p. 141).
1.
Access the GROUP ASSIGN popup for the desired channel.
fig.ScrChGroupAssign2.eps
2.
Verify that the target channel is correct.
3.
Move the cursor to the desired MUTE group, and press
[ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
For details on MUTE groups, refer to “Mute groups” (p. 145).
1.
Access the CHANNEL DISPLAY screen for the AUX channel
to which you want to copy the MAIN mix.
2.
Press [F7 (COPY MAIN MIX)].
A confirmation message will ask you to confirm the Copy
operation.
3.
Press [F8 (OK)] to copy the send amount from each input
channel to MAIN.
If you press [F7 (CANCEL)], the Copy operation will be
cancelled.
In the case of stereo-linked AUX channels, the pan from each
input channel to MAIN will also be copied.
Accessing the GROUP ASSIGN
popup
Assigning a channel to a DCA group
Assigning a channel to a MUTE
group
Copying the MAIN mix
(AUX channels only)
M-400_v15_e.book 84 ページ ２００８年６月２０日 金曜日 午後４時５分
