RSS M-400 Owner'S Manual Download Page 205

Page: 205 / 253

205

Other settings and functions

Access the USB MEMORY screen.

fig.ScrSysUSBMem.eps

In the file list, move the cursor to the desired file.

You can’t copy a folder.

Press [F4 (COPY)].

A message will ask you to confirm the Copy operation.

Press [F8 (COPY)] to carry out the Copy operation. The file you
selected in step 2 will be copied to the clipboard.

If you press [F7 (CANCEL)], the operation will be cancelled.

In the file list, move to the level at which you want to paste
the copied file.

Press [F5 (PASTE)].

fig.ScrPasteConf.eps

A message will ask you to confirm the Paste operation.

Press [F8 (PASTE)] to carry out the Paste operation.

If you press [F7 (CANCEL)], the operation will be cancelled.

You can’t paste while you playing/recording the USB memory
recorder.

Access the USB MEMORY screen.

fig.ScrSysUSBMem.eps

In the file list, move the cursor to the file you want to delete.

Press [F6 (DELETE)].

A message will ask you to confirm the Delete operation.

Press [F8 (DELETE)] to carry out the Delete operation.

If you press [F7 (CANCEL)], the operation will be cancelled.

Copying a file

Deleting a file

M-400_v15_e.book 205 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands