RSS M-400 Owner'S Manual Download Page 8

Page: 8 / 253

Functionality added

• Support for RS-232C transmission/reception (p. 190)

• Support for the M-400RCS (p. 189)

Input channels

• Gate/expander/ducking is now supported for all input

channels. A maximum of 24 units can be used simultaneously
(p. 93).

• Compressor is now supported for all input channels. A

maximum of 24 units can be used simultaneously (p. 99).

• Direct out has been added to all input channels (p. 60).

MATRIX channels

• MATRIX1–MATRIX8 have been added (p. 85).

In addition to mixing audio signals from AUX1–AUX16 and
MAIN L/R, you can select and mix any two input channels for
each MATRIX.

Output patchbay

• Now you can select the following items in the output patchbay.

• CH1–CH48 direct out
• Talkback output
• Oscillator output

Effects and 31-band GEQ

• The DELAY UNIT parameter has been added to delay-type

effects (p. 229).

• This lets you specify the delay in any of these units: msec,

Meter, Feet, Frame, or Note.

• When specifying the delay in Note units, the TEMPO parameter

has been added (p. 131).

• When using the top panel faders to control the GEQ, you can

reset a fader to the 0 dB position by pressing the corresponding
MUTE button (p. 135).

User settings

• User buttons 9–16 have been added (p. 177).

• The following items have been added as functions for the user

buttons (p. 209).

• EDIT FX (FX1–FX4)
• EDIT GEQ (GEQ1–GEQ4)
• TAP TEMPO

• The following functions have been added to the user

preferences (p. 178).

• AUX/DCA layer select button
• SHIFT LOCK select button

REAC

• The input from the S-4000S can now be distributed to the

SPLIT/BACKUP connector (a maximum of 32 channels).

In order to distribute inputs using the S-4000S, the firmware of
the S-4000S must be version 2.010 or later.

Other settings

• The MUTE switch can now be disabled for MAIN L/R (p. 196).

Improvements in panel operation

• You can now use [SHIFT] + GATE [DISP] to turn the gate on/

off for the selected channel.

• You can now use [SHIFT] + COMP [DISP] to turn the

compressor on/off for the selected channel.

• You can now use [SHIFT] + AUX SENDS [1]–[16] to turn on/off

the AUX send or MATRIX send.

• You can now use [SHIFT] + USER [1]–[8] to operate user

buttons 9–16.

• You can now use a top panel [SEL] button to assign a channel to

a DCA group (p. 142).

• You can now use a top panel [SEL] button to assign a channel to

a MUTE group (p. 146)

Improvements in screen display

• The layout of the top display area has been re-designed, and the

channel display has been enlarged (p. 47).

Functionality added in version

1.10

Functionality added in version

1.50

M-400_v15_e.book 8 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands