manualshive.com logo in svg

RSS M-400, Owner'S Manual

The RSS M-400 Owner's Manual is a comprehensive guide that allows users to unleash the full potential of their device. With detailed instructions and troubleshooting tips, this manual is a valuable resource for anyone who wants to optimize their experience. Download it for free at manualshive.com to get started.

Share
Download
background image

 

143

DCA groups

 

DCA groups

 

You can specify a name and color label for each DCA group. A name 
of up to six characters can be specified, and you can choose one of 
eight colors as the color label.
The NAME EDIT popup is used to edit the name and select a color label.

 

fig.ScrChNameEditGuide.eps

 

1.

 

TEMPLATE

 

Here you can select a name from a list.

 

•

CATEGORY list

 

Here you can select a category.

 

•

NAME list

 

Here you can select a name from within the category you specified.

 

Select the CATEGORY first, and then select the NAME.

 

2.

 

Name edit field

 

In this field you can enter any desired name.

 

3.

 

Color label selection buttons

 

Use these buttons to select a color label for the DCA group.

The function buttons perform the following operations.

 

A maximum of sixteen names are remembered by HISTORY. 
If HISTORY becomes full, the oldest names will be deleted.

 

1.

 

Access the DCA GROUP screen.

 

fig.ScrDCAGroup.eps

 

2.

 

Move the cursor to the DCA group fader of the desired DCA 
group, and press [F7 (NAME EDIT)].

 

fig.ScrChNameEdit.eps

 

The NAME EDIT popup will appear.

 

1.

 

Access the NAME EDIT popup for the desired DCA group.

 

fig.ScrChNameEdit.eps

 

2.

 

Move the cursor to the name edit field, and edit the DCA 
Group name.

 

3.

 

Press [F8 (CLOSE)] to close the popup.

 

For details on name editing, refer to “Editing a name” (p. 50).

 

Specifying a name and color 

label for the DCA group

 

NAME EDIT popup

 

[F1 (Recall Template)]

Enters the name selected in the TEM-
PLATE field into the name edit field.

[F2 (HISTORY)]

Successively recalls the most recent 
names that were entered since the power 
was turned on.

[F3 (INSERT)]

Inserts a space at the cursor location. The 
characters to the right of the cursor loca-
tion will be moved toward the right.

[F4 (A/a)]

Changes the character at the cursor loca-
tion between uppercase and lowercase.

[F5 (NUM)]

Changes the character at the cursor loca-
tion to “0.”

[F6 (DELETE)]

Deletes the character at the cursor location. 
The characters to the right of the cursor lo-
cation will be moved toward the left.

[F8 (CLOSE)]

Closes the popup.

1

2

3

 

Accessing the NAME EDIT popup

Editing the name of a DCA group

M-400_v15_e.book 143 ページ ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Reviews:

No comments

Related manuals for M-400

Euro-Pro Bravetti Platinum Pro EP552HL Owner'S Manual preview
Bravetti Platinum Pro EP552HL
Brand: Euro-Pro Pages: 4
TC Electronic DARK MATTER Quick Start Manual preview
DARK MATTER
Brand: TC Electronic Pages: 6
DV Mark Over Marker Owner'S Manual preview
Over Marker
Brand: DV Mark Pages: 8
Hamilton Beach Hand/Stand Mixer Owner'S Manual preview
Hand/Stand Mixer
Brand: Hamilton Beach Pages: 20
Behringer Xenyx 1222FX User Manual preview
Xenyx 1222FX
Brand: Behringer Pages: 11
tech21 SansAmp PSA 2.0 Owner'S Manual preview
SansAmp PSA 2.0
Brand: tech21 Pages: 12
Vanguard 45198 Operating Information Manual preview
45198
Brand: Vanguard Pages: 86
Fujitsu LAN Console Installation, Configuration And Operation preview
LAN Console
Brand: Fujitsu Pages: 139
Bosch MSM6BRE Operating Instructions Manual preview
MSM6BRE
Brand: Bosch Pages: 70
TZS First AUSTRIA FA-5259-4 Instruction Manual preview
FA-5259-4
Brand: TZS First AUSTRIA Pages: 16
SEVERIN HANDMIXER HM 3812 Dimensions preview
HANDMIXER HM 3812
Brand: SEVERIN Pages: 1
Ide Line 746-086 User Manual preview
746-086
Brand: Ide Line Pages: 23
FERREX 703353 User Manual preview
703353
Brand: FERREX Pages: 18
Whirlwind oc-bass Quick Start Manual preview
oc-bass
Brand: Whirlwind Pages: 3
Oras Ventura 8020 Installation And Maintenance Manual preview
Ventura 8020
Brand: Oras Pages: 68
Ankarsrum AKM 6230 Manual preview
AKM 6230
Brand: Ankarsrum Pages: 15
Peloton PLTN-RB1VO User Manual preview
PLTN-RB1VO
Brand: Peloton Pages: 14
Blackstar HT-DUAL Owner'S Manual preview
HT-DUAL
Brand: Blackstar Pages: 17

Brands by name

Popular brands

Load more brands